Tasa de supervivencia de prótesis fija unitaria de cerámica feldespática y feldespática reforzada / Survival rate of feldspathic and reinforced feldspathic ceramic single-unit fixed prostheses

Introducción: Gracias a su eficiencia y al uso exclusivo de cerámicas libres de metal, en rehabilitación oral se ha logrado alcanzar los estándares estéticos y mecánicos, manteniendo o, incluso, superando, la calidad de los tratamientos en comparación con las restauraciones metal cerámicas tradicionales. Actualmente los mecanismos de confeccion de cerámica libre están evolucionando cada vez mas hacia las tecnologías maquinadas CAD-CAM y disminuyendo su producción mediante la técnica de Inyeccion PRESS. Objetivo: Comparar la tasa de supervivencia de prótesis fija unitaria realizadas con cerámicas feldespáticas convencionales y reforzadas con disilicato de litio, confeccionadas con sistema CAD/CAM de CEREC® chair-side, en comparación con el método de inyección de laboratorio PRESS convencional de prensión. Métodos: Revisión sistemática realizada a través de búsqueda de evidencia científica en PubMed, PubMed Clinical Queries, Epistemónikos, Tripdatabase, Cochrane Library, recursos electrónicos de la Universidad de los Andes y bibliografía retrógrada, de artículos publicados hasta el año 2019. Se incluyeron todos aquellos estudios referentes a prótesis fija unitaria de cerámicas feldespática convencional y feldespática reforzada con disilicato de litio, confeccionadas mediante CAD/CAM y/o método convencional. Resultados: Un total de 28 artículos cumplieron los criterios de inclusión: 21 estudios observacionales de cohorte, 4 ensayos clínicos aleatorizados y 3 no aleatorizados. A corto y mediano plazo, CAD/CAM de CEREC® registró tasas de supervivencia de 98 por ciento y 91,9 por ciento, respectivamente. El sistema convencional registró tasas de supervivencia de 97,5 por ciento a corto plazo y 93 por ciento a mediano. Conclusiones: A corto plazo se describe en la literatura que CAD/CAM de CEREC® tuvo una tasa de supervivencia ligeramente superior al sistema convencional. Por otro lado, a mediano plazo CAD/CAM de CEREC® presentó una leve disminución respecto al sistema convencional. Aún no hay estudios disponibles para determinar la supervivencia clínica de los tratamientos a largo plazo(AU)

Introduction: Thanks to its efficiency and the exclusive use of metal-free ceramics, in oral rehabilitation it has been possible to achieve aesthetic and mechanical standards, maintaining or even exceeding the quality of the treatments compared to traditional metal-ceramic restorations. Currently, free ceramic manufacturing mechanisms are increasingly evolving towards CAD-CAM machined technologies and decreasing their conventional production through the PRESS Injection technique. Objective: Compare the survival rate of single-unit fixed prostheses made with conventional feldspathic ceramics and reinforced with lithium disilicate by the CEREC® CAD/CAM chairside system, with the conventional PRESS laboratory injection method. Methods: A systematic review was conducted of scientific evidence included in papers published until the year 2019 in PubMed, PubMed Clinical Queries, Epistemonikos, Tripdatabase, Cochrane Library, electronic resources of Los Andes Peruvian University, and retrograde bibliography. The papers selected dealt with conventional and lithium-disilicate reinforced feldspathic ceramic single-unit prostheses made by CAD/CAM and/or the conventional method. Results: A total 28 papers met the inclusion criteria. Of these, 21 were observational cohort studies, four were randomized clinical assays and three were non-randomized assays. Short- and mid-term, CEREC® CAD/CAM achieved survival rates of 98 percent and 91.9 percent, respectively. The conventional system achieved survival rates of 97.5 percent short-term and 93 percent mid-term. Conclusions: As described in the literature, CEREC® CAD/CAM had a slightly higher survival rate than the conventional system in the short term. In the medium term, however, CEREC® CAD/CAM displayed a slight reduction in comparison with the conventional system. No studies are available to determine the clinical survival of the treatments in the long term(AU)

Accuracy of dental models fabricated by CAD/CAM milling method and 3D printing method

The purpose of this study was to evaluate the accuracy of a dental model fabricated using the CAD/CAM milling method and the 3D printing method. materials and method: this study was conducted in sequence of the digitization of the master model using an intraoral scanner, the manufacturing of working models (milling model, Multi-jet printing model and color-jet printing model) by using the scan data of the master model, the digitization of the working model by using a laboratory scanner, the superimposition of the digital data of the master model and working models using inspection software, and 3-dimensional analysis. ten measurements per group were done by one practitioner. one-way ANOVA and Tukey's post-hoc test were performed to compare the difference between the three groups. results: the overall difference in models caused by the manufacturing method was measured as 73.05µm±9.64µm, 84.52µm±4.78µm, and 96.05µm±5.43µm in the milling group, multi-jet printing group and color-jet printing group, respectively. the difference according to the shape of the teeth, the abutment teeth among the three parts was recorded with the lowest values as 19.18±2.08µm, 77.10±7.48µm, and 56.63±4.58µm. conclusions: dental models manufactured by the CAD/CAM milling method presented superior accuracy over the models manufactured by the 3D printing method. therefore, the use of optimized CAD software and appropriate materials is crucial for the fabrication accuracy of dental models.

Dental ceramics: a review of new materials and processing methods

Abstract The evolution of computerized systems for the production of dental restorations associated to the development of novel microstructures for ceramic materials has caused an important change in the clinical workflow for dentists and technicians, as well as in the treatment options offered to patients. New microstructures have also been developed by the industry in order to offer ceramic and composite materials with optimized properties, i.e., good mechanical properties, appropriate wear behavior and acceptable aesthetic characteristics. The objective of this literature review is to discuss the main advantages and disadvantages of the new ceramic systems and processing methods. The manuscript is divided in five parts: I) monolithic zirconia restorations; II) multilayered dental prostheses; III) new glass-ceramics; IV) polymer infiltrated ceramics; and V) novel processing technologies. Dental ceramics and processing technologies have evolved significantly in the past ten years, with most of the evolution being related to new microstructures and CAD-CAM methods. In addition, a trend towards the use of monolithic restorations has changed the way clinicians produce all-ceramic dental prostheses, since the more aesthetic multilayered restorations unfortunately are more prone to chipping or delamination. Composite materials processed via CAD-CAM have become an interesting option, as they have intermediate properties between ceramics and polymers and are more easily milled and polished.

Base eletrônica de dados clínicos e cirúrgicos em isquemia cronica de membros inferiores / Electronic clinical and surgical database in chronic lower limb ischemia

CONTEXTO: Um sistema eletrônico de protocolo seria capaz de armazenar dados clínicos e possibilitar futuras pesquisas, visando a rapidez, eficiência de cruzamentos e análise de tais dados. OBJETIVO: a) criar uma base de dados clínicos cirúrgicos em doenças vasculares e, a partir desta, uma base em Isquemia Crônica de Membros Inferiores; b) informatizar essa base sob forma de um protocolo eletrônico; c) incorporar ao SINPE(c) (Sistema Integrado de Protocolos Eletrônicos); d) realizar um projeto piloto. MÉTODOS: Criou-se uma base teórica de dados clínicos sobre as doenças vasculares. O protocolo específico foi criado considerando-se as características individuais das doenças causadoras de Isquemia Crônica de Membros Inferiores. Após seu término, essa base eletrônica e informatizada seria incorporada ao SINPE(c). RESULTADOS: O usuário, previamente cadastrado, realizará o cadastro do paciente e selecionará, dentro do protocolo mestre, o protocolo específico em Isquemia Crônica de Membros Inferiores, para acesso aos seus respectivos dados clínicos. Orientado pelas alternativas diretas de preenchimento, o usuário seleciona apenas os dados pertencentes ao seu paciente. Estes podem ser resgatados para pesquisa, mostrando o número de coletas que satisfazem os parâmetros escolhidos e informações estatísticas sobre a mesma. CONCLUSÃO: a) a criação da base teórica de dados clínicos e cirúrgicos em doenças vasculares e, a partir desta, em Isquemia Crônica de Membros Inferiores, foi factível; b) a informatização da base teórica sob forma de protocolo eletrônico foi exequível; c) o protocolo eletrônico mestre e específico poderá ser incorporado ao SINPE(c), d) o projeto piloto foi criado ...

BACKGROUND: Electronic medical record systems may optimize future studies by improving speed, as well as data comparison and analysis. OBJECTIVE: (a) To create a general database of clinical and surgical vascular diseases and select data from it to create a specific database of chronic lower limb ischemia; b) to store this database in the form of an electronic system; c) to incorporate this database into the Brazilian integrated electronic medical record system (SINPE(c)); and (d) to conduct a pilot study to test the system. METHODS: A general database of clinical vascular disease was created, and a specific system was developed to record the individual characteristics of the diseases that cause chronic ischemia of lower limbs. When completed, the database was incorporated into SINPE(c). RESULTS: For data collection, an authorized user enters patient data and creates a medical record for that patient. After that, chronic ischemia of lower limbs is selected in the master system to access clinical data. Aided by the autofill tool, the user selects only the data for that specific patient. Data may be retrieved for studies, to find out the number of entries that meet the chosen parameters, and to provide statistical information about them. CONCLUSION: (a) The theoretical database of clinical and surgical vascular diseases and the derived database of chronic lower limb ischemia were created; (b) the theoretical electronic database was created; c) the electronic medical records in both the master and the specific database were incorporated into SINPE(c), (d) the pilot study was successfully created and tested using the parser module of SINPE(c). .

Nuevos enfoques de las buenas prácticas de Manufactura / Good manufacturing practices new approaches

Durante los últimos años, el trabajo en Buenas Prácticas de Manufactura (bpm), además de contribuir a mejorar la calidad de los productos farmacéuticos disponibles en el mercado, ha permitido realizar un avance importante en la interpretación conceptual y en la aplicación práctica del verdadero significado del aseguramiento de la calidad en la industria farmacéutica. En ese sentido, este artículo analiza los aportes que sobre este tema han tenido las buenas prácticas de ingeniería, el desarrollo de producto, los programas de acciones correctivas y acciones preventivas, la gestión del riesgo en calidad, el control de procesos productivos en tiempo real y el sistema de gestión de la calidad para la industria farmacéutica. Sin duda, su adopción, que en la mayoría de los casos no corresponde a una exigencia explícita de la guía de bpm y que supone una inversión mayor de recursos, ofrece claros beneficios organizacionales y aporta evidencia para fortalecer la confianza, especialmente de las autoridades reguladoras, del cumplimiento del compromiso con la calidad que manifiesta una empresa determinada.

During the previous years, the Good Manufacturing Practices (gmp) work, besides contributing in improving the pharmaceutical products quality, has allowed an important progress in both the understanding and the practical application in the real meaning of the quality assurance in the pharmaceutical industry. As a contribution to this issue, this document studies the contributions of the good engineering practices, the product development, the corrective and preventive action system, the quality risk management, the process analytical technology and the pharmaceutical quality system. The implementation of these concepts, that in the majority of cases are not explicit gmp guide requirements, could suppose spending more money from the firm. However, on the contrary, it would give obvious benefits and contribute to have evidence, especially for the competent national authorities, about the fulfillment quality police implementation.

Tecnología CAD-CAM: diseño asistido por computador-manufactura asistida por computador- en cirugía implantológica / CAD-CAM technology: computed-aided design/computer-assisted manufacture in implant surgery

Este trabajo describe un protocolo que utiliza la tomografía computada multislice, tecnología CAD-CAM, e internet, para la construcción de una guía quirúrgica, planeamiento de colocación de implantes y fabricación de una prótesis definitiva o temporaria, la cual es instalada en el momento de colocación de los implantes. Este procedimiento reduce notablemente el tiempo total de tratamiento, el tiempo de la cirugía y la recuperación posquirúrgica. Pacientes con maxilares edéntulos y prótesis con marcas radioopacas, se escanean con la TAC con cortes entre 0,3 y 0,5mm. Las imágenes tomográficas son transferidas a un programa tridimensional de planeamiento y colocación estratégica de los implantes. Después que los implantes fueron colocados virtualmente en la computadora, el plan quirúrgico de tratamiento es enviado a un centro de manufactura que nos facilita la guía quirúrgica. La cirugía sin colgajo se realiza con esta guía, y la prótesis se instala logrando función inmediata. Con esta guía se logra reproducir la profundidad, angulación y posición mesiodistal y vestíbulo palatina de cada implante en forma individual. El tiempo total de tratamiento es considerablemente menor a los protocolos habituales y los síntomas de dolor, tumefacción y sangrado son mínimos. Aunque los software han sido desarrollados para facilitar la selección y localización de los implantes, tranferir esta información al campo quirúrgico sigue siendo una tarea difícil. A través de los últimos año, la tecnología CAD-CAM ha permitido la utilización de los datos de la TC para transferir la colocación virtual de los implantes a la cirugía